For iPhone SE3

AspireCells iPhone SE3 (2022 3rd generation) battery replacement, with a complete repair tool kit and adhesive, 2018mAh, original standard capacity
========================================================
【Seamless Installation for iPhone SE3】This iPhone SE3 battery is compatible with iPhone SE (2022 3rd generation) models A2783 A2595 A2785 A2782 A2784 (Note: Not suitable for iPhone SE, SE 2nd generation). Please check your phone model before purchasing.
【Unmatched Performance Under Extreme Conditions】AspireCells batteries operate smoothly in temperatures ranging from -40°C to 60°C, and charge reliably at -5°C, outperforming most mobile batteries limited to warmer conditions. When traveling with your beloved iPhone, you don't have to worry about the phone battery failing to power and charge due to extremely low or high temperatures.
【Safety Assurance】A+ grade iPhone SE3 battery ensures fast and efficient charging. Multiple protections provide safer operation for users and devices, equipped with high-quality OEM TI chips to prevent overcharging, over-discharging, and overheating. Meanwhile, AspireCells iPhone SE3 batteries have passed CE, FCC, UL, ISO9001/14001, RoHS and other certifications. AspireCells battery factory is meticulously crafted with our 20+ years of battery research and manufacturing expertise, no fake labels, no pop-ups! You can buy with confidence.
【Easy Installation】We provide professional tool kits and detailed instructions. Simplify battery replacement with clear step-by-step instructions. Before disassembling, please carefully watch related videos on YouTube about battery replacement.
【Guaranteed Support】24-month warranty, 30-day refund, and 24-hour email service. Please feel free to contact us if you have any questions.
===============================================
Steps to replace the IPhone SE3 battery:
1. Turn off the phone.
2. Remove the two fixing screws at the bottom of the phone.
3. Press the suction cup onto the filter (bottom) and gently pull upwards.
Insert the disassembly plate into the gap that has been pulled out.
Slide the screen open along the phone.
4. Please note that the screen must be opened slowly from left to right.
Do not exceed 90 degrees to avoid damaging the connecting cables.
5. Remove the four screws securing the battery interface cover plate.
Disconnect the battery interface and use a plastic pry bar to turn off the power.
Use a plastic pry bar to disconnect the touch and display interfaces.
6. Remove the three screws securing the cover plate
Earphone component (upper right corner of the phone).
Disconnect the earphone component interface and use a plastic pry bar to separate the screen.
7. Remove the battery by peeling off the adhesive tape. There are four strips of tape,
two at the top and two at the bottom.
Gently pull out the tape with your fingers or tweezers. Remove the battery.
8. Place the tape on the back
Then remove the outer protective film of the tape,
Slowly insert the new battery into the phone body.
It is recommended to first correctly align the battery interface,
then fill the entire battery and gently press the body.
9. Place the new waterproof adhesive,
Press and peel off the protective film.
Next, clamp the screen to the body, insert the earphone component interface,
and finally the battery interface.
10. Now you can turn on the phone to test.
If it works normally, fix the four screws of the battery interface cover plate,
and the three screws of the earphone component cover plate.
11. Next, test the screen,
If it works, peel off the protective film from the four sides of the waterproof adhesive.
12. To begin with, fix the top scraper click,
then click the sides and bottom simultaneously.
Just make sure to apply pressure to the sides of the frame.
13. Finally, fix the two fixing screws at the bottom of the phone.